Eurotech 835SL-Y


Product Details


835 SLY SPECIFICATIONS

 

MACHINING CAPACITY

Maximum bar capacity…………………………………… 3.15”

Maximum machining diameter………………………….. 12.6”

Maximum machining length…………………………… 21.65”

Maximum swing over diameter………………………… 20.5”

Maximum Y-axis stroke………………………. +2.36”/-1.57”

MAIN SPINDLE

Draw-tube capacity……………………………… 3.15”(80mm)

Spindle bore………………………………………………….. 4.4”

Spindle speed range (infinitely variable)……………… 3200

Variable speed steps……………………………… Direct drive

Spindle motor (Fanuc 22S)……………………………… 35 HP

Motor type……………………………………………. Wide range

Spindle nose…………………………………………….. ASA A8

SUB- SPINDLE

Bar capacity………………………………………. 1.77”(45mm)

Spindle bore………………………………………. 2.16”(55mm)

Spindle speed range (infinitely variable)……………… 4000

Spindle drive motor

(variable speed) max rating………………………………. 10HP

Spindle nose…………………………………………… ASA A2-5

Slide movement(B-axis)………………………….. NC control

Slide stroke (B-axis)…………………………………….. 20.08”

Rapid traverse rate (B-axis)………………………….. 945 IPM

Spindle positioning…….. programmable M16 to .001 deg.

TURRET

Turret type………………………. non-lift, hydraulically actuated

Turret indexing time     ………. . 0.10 sec/pos.(1-station)

Turret indexing type………………………………. bi-directional

Number of stations…………………………………………….. 12

WORK HOLDING

Standard

Main spindle                   B93…………………………. .3 1/8”

Sub-spindle                     B60…………………………. . 1.77”

Optional

Main spindle                B93………………………… . 3-1/4”

Autoblok chuck……………… . 8”

Autoblok chuck……………. . 10”

Sub-spindle                  Autoblok chuck……………… . 6”

 

REVOLVING  TOOL ATTACHMENT TURRET

Number of positions…………………………………………. 12

Drive motor – max. rating (Fanuc)…………………… 5 HP

Speed range (infinitely variable)……………… 4000 RPM

Machining capacity      – drilling………………….. . 25/32”

– end mill………………… . 25/32”

– tapping………………………. . ½”

Engagement time…………………………………. immediate

C-AXIS CONTROL W/ SPINDLE POSITIONING

Spindle……………………………………………………… Main

Spindle positioning………………………………….. Full “C”

Minimum command increment…………….. 0.001 degree

Positioning system…………………………… Spindle motor

Degree of movement……………………….. .Programmable

Rapid speed rate……………………………………. 100 RPM

GENERAL INFORMATION

Voltage required…………………….. 400 volt ac, 3-phase

Air required………………………………… 80 psi @ 4 CFM

Amperage Draw…………………………………….. 75 Amp.

MACHINE DIMENSIONS

Width………………………………………………………. 77.4”

Height……………………………………………………… 84.6”

Length…………………………………………………… . 117.3”

Length with chip conveyor………………………….. 157.5”

Machine weight with chip conveyor………… 10,580 lbs.